$ 69.64
$ 69.64
$ 69.64
Weha ET Check Valve 3/8 in for A1500 Vacuum Lifter — Replacement
Replacement 3/8 in ET check valve for the Weha A1500 vacuum lifter. The check valve is part of the vacuum-retention circuit that holds vacuum on the slab if the pump or hose loses pressure — a safety-critical component on any vacuum slab lifter.
Features
- 3/8 in ET check valve replacement
- Vacuum-retention safety component
- For the Weha A1500 vacuum slab lifter
- Direct-fit OEM replacement
| Property | Detail |
|---|---|
| Brand | Weha |
| Part Number | 148532 |
| Type | Check valve — 3/8 in ET, replacement |
| Compatible System | Weha A1500 Vacuum Lifter |
| Unit Weight | 1.1 lb (0.5 kg) |
- Take the A1500 out of service before any vacuum-circuit work.
- Replace the existing check valve per the A1500 service documentation.
- Verify hold-vacuum performance per the lifter manufacturer spec before returning to slab handling.
- Function-test on a representative load before any production use.
- Wear ANSI Z87 eye protection and a dust-rated respirator.
- Inspect the tool/accessory before each use; remove from service if cracks, deformation, or excessive wear are visible.
- Follow OSHA and local site safety procedures at all times.
- Never use a vacuum lifter without verifying the check-valve function after service.
Always wear appropriate PPE. Follow local safety regulations when using power tools or material-handling equipment.