-
Brand
-
Model
-
Package Dimensions
Aardwolf AVLP1-Pro Single Pad Vacuum Lifter — 551 lb Capacity
The Aardwolf AVLP1-Pro is a cordless single-pad vacuum lifter rated for 551 lb (250 kg) horizontal working loads. Built for stone fabricators, glass installers, and countertop crews moving slabs and finished tops, it operates on a 12V Bosch lithium-ion battery with no air hose or compressor required. An onboard vacuum reserve tank and audible low-vacuum alarm deliver added safety during transport.
Features
- 551 lb (250 kg) horizontal working load — 276 lb (125 kg) vertical
- Single 19.7 in × 11.8 in (500 × 300 mm) aluminium suction pad
- Cordless 12V Bosch GBA 2.0 Ah Li-Ion battery — includes GAL 12V-40 charger
- Vacuum reserve tank holds suction during pump pause or power loss
- Audible low-vacuum alarm warns the operator before lift-off risk
- Analog vacuum gauge gives instant visual confirmation of seal pressure
- 0–90 degree pneumatic tilt piston for vertical and horizontal slab handling
- Built to AS 4991-2004 lifting equipment standard
AVLP1PRO-250 — AVLP1PRO-250 Pneumatic Vacuum Lifter Pro (1-pad / 250 kg)
| Property | Detail |
|---|---|
| Working Load Limit (Horizontal) | 276 lb (125 kg) |
| Working Load Limit (Vertical) | 125 lb (~57 kg) |
| Vacuum Pads | One |
| Tilt | Pneumatic 0-90 deg |
| Air Supply | 5 bar (72 psi) compressed air |
| Use | Stone and glass slab handling |
| Safety | Audio/visual alarm system |
AVLP2-500 — AVLP2-500 Pneumatic Vacuum Lifter (2-pad / 500 kg)
| Property | Detail |
|---|---|
| Working Load Limit (Horizontal) | 1,102 lb (500 kg) |
| Working Load Limit (Vertical) | 551 lb (250 kg) |
| Vacuum Pads | Two |
| Tilt | Pneumatic 0-90 deg vertical/horizontal |
| Air Supply | 5 bar (72 psi) compressed air |
| Use | Marble and granite slab handling, smooth or rough |
| Safety | Audio/visual alarm, auto vacuum replenishment |
AVLP2PRO-500 — AVLP2PRO-500 Vacuum Lifter Pro (2-pad / 500 kg)
| Property | Detail |
|---|---|
| Working Load Limit (Horizontal) | 1,102 lb (500 kg) |
| Working Load Limit (Vertical) | 551 lb (250 kg) |
| Vacuum Pads | Two; pneumatic tilting |
| Tilt | Pneumatic 0-90 deg vertical/horizontal |
| Air Supply | 5 bar (72 psi) compressed air |
| Power | Rechargeable alarm battery |
| Safety | Audio/visual alarm, auto vacuum replenishment, vacuum reserve tank |
AVLP3-600P — AVLP3-600P Pneumatic Vacuum Lifter Pro (3-pad / 600 kg)
| Property | Detail |
|---|---|
| Working Load Limit (Horizontal) | 1,323 lb (600 kg) |
| Working Load Limit (Vertical) | 661 lb (300 kg) |
| Vacuum Pads | Three |
| Tilt | Pneumatic 0-90 deg vertical/horizontal |
| Air Supply | 5 bar (72 psi) compressed air |
| Use | Heavy stone slab handling |
| Safety | Audio/visual alarm, auto vacuum replenishment |
- Charge the 12V battery fully and confirm the gauge zeros before each shift.
- Wipe the slab clean — remove dust, water, and stone slurry from the contact area.
- Center the pad on the slab and press down to seat the rubber seal.
- Switch on the pump and wait until the gauge reaches the green safe zone.
- Lift slowly with a crane, gantry, or forklift jib and keep the load below shoulder height.
- Always wear gloves, steel-toe boots, and a hard hat when handling slabs.
Suits granite, marble, quartzite, engineered quartz, porcelain slabs, and flat glass panels. Best on smooth, non-porous, clean surfaces. Not recommended for textured, leathered, or heavily honed finishes where the seal cannot fully engage.
Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.
Specifications
| Model | AVLP1PRO-250, AVLP2PRO-500, AVLP2-500, AVLP3-600P |
| Brand | Aardwolf |
| Package Dimensions | 58" x 13" x 32" |