$ 25.53
$ 25.53
$ 25.53
-
Grit
Superior E-1000 Flowing Epoxy Parts for Stone Laminating and Seaming
The Diamax PDE4100 is part of Diamax stone fabrication tooling is engineered for professional shops producing countertops, vanity tops, and architectural stone. This product is designed for use with water-fed polishers to refine stone surfaces through progressive grit steps.
Manufacturer overview: 4" Cyclone Electroplated Flexible Disk 100 Grit.
Features
- Diamax Diamax series tooling
- Manufacturer model code: PDE4100
- Engineered for professional stone-fabrication workflows
- Designed for wet polishing pads applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Diamax |
| Model / Part Number | PDE4100 |
| Vendor Category | Polisher Wet |
| Product Type | Wet Polishing Pads |
- Mount the pad on a velcro backer matched to the pad diameter.
- Use continuous water feed; do not dry-run a wet pad.
- Run the polisher at the manufacturer-specified RPM for the pad diameter.
- Work the slab in steady, overlapping passes — no edge-loading.
- Step through the grit sequence in order; rinse the slab between grit changes.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.
Specifications
| Grit | #50, #100, #200, #400, #800, #1500, #3000 |