İçereği Atla
  1. Tüm ürünler
  2. Material Handling
  3. Miter Clamps
  4. Aardwolf Miter Clamps
  5. Miter Clamps
Fiyat Listesi: General Price List (USD) Fiyat Listesi
Fiyat Listesi: General Price List (USD) Fiyat Listesi

Aardwolf Miter Clamps

Aardwolf Miter Clamps draw stone miter joints tight while the adhesive cures, producing seamless waterfall edges and built-up countertop fronts. ABMC, ASMC250, and MC250 models cover different jaw geometries and lengths for the standard 45-degree miter and right-angle setups. Vacuum-suction or screw-clamp seating depending on model.

Features

  • Pulls miter joints tight for invisible seams during epoxy cure
  • Three models: ABMC, ASMC250, and MC250 for different setups
  • Adjustable angle and reach for 45-degree and 90-degree joints
  • Steel construction with non-marring contact pads
  • Designed for waterfall countertops and built-up edge profiles
  • Quick set-up reduces install time per job
ABMC — Vacuum-Assisted Miter Clamp Set (Battery Pump)
Property Detail
Type Vacuum-assisted miter clamping system, face-up mitering
Includes 2 miter clamps, 2 corner clamps, battery-operated vacuum pump
Net Weight 26.5 lb (12 kg)
Gross Weight 28.7 lb (13 kg)
Features Reserve tank, pressure switch, vacuum gauge
Adjustability Threaded leveling rods, sliding rest arms for varied apron widths
Application Bird-beak edges and 45-degree miters, finished side up
ASMC250 — Vacuum-Assisted Single Miter Clamp
Property Detail
Type Single vacuum-assisted miter clamp
Application 90-degree mitered panel fit-up and gluing
Mounting Suction-cup attachment to slab top
MC250 — Mechanical Miter Clamp
Property Detail
Type Mechanical miter clamp (suction-cup mounted)
Grip Range 2 - 9.8 in
Cup Diameter 4.6 in
Net Weight 8.6 lb
Gross Weight 9.7 lb
Packaging 16.5 x 9 x 9.8 in
Application 90-degree mitered panel fit-up and gluing, no flipping required
  1. Apply epoxy or stone adhesive to both miter faces per manufacturer instructions.
  2. Position the panels in their final orientation on the cabinet.
  3. Attach the miter clamps along the joint at even intervals.
  4. Tighten each clamp evenly to draw the joint closed without offset.
  5. Wipe excess adhesive and let cure undisturbed per resin manufacturer.
  6. Wear gloves and eye protection when working with stone adhesives.

Use on granite, marble, quartz, and porcelain countertops with miter, waterfall, and edge-buildup joints.

Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.

Özellikler

Model MC250, ASMC250, ABMC
Marka Aardwolf