Alpha PSC-150 Pneumatic Stone Cutter Powerful Pneumatic Stone Cutter for Industrial Applications (6")

Alpha PSC-150

Alpha® is excited to introduce a new industrial quality pneumatic stone cutter, called the PSC-150, which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4” (3cm) stone slabs in one pass. In addition, Alpha® recognized the need for an industrial quality portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without time-consuming setup. Since it is a pneumatic powered motor, you can save the repair and maintenance costs of electric stone cutters when sink-hole cutting and groove-cutting for rodding applications. Alpha® offers a carriage that retrofits on the Alpha® Guide Rail System to support the application of making precise miter cuts for the perfect lamination. The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. The flexibility of the hoses helps reduce operator fatigue and improves the operation. To ensure a long maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air. The Alpha® PSC-150 comes with an Eclipse II 6” blade which is the recommended turbo blade for granite and engineered stone. It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less.

Air Pressure:  90 PSI (6.2 Bar)

Air Consumption Min:  929 l/min 32 CFM / 1HP*  

Air Consumption Max:  48 CFM / 2HP   

No Load Speed:  8,500 RPM

Air Inlet:  3/8” NPSM

3/8” NPSM:  1/4” BSPP

Arbor:  7/8” (22mm)

Max. HP:  2.0 HP

Cutting Disc Diameter:  6" (150mm)

Weight:  10.3 lbs (4.6 kgs)

Note:

To control the amount of CFM required, use the reduced flow air inlet fitting 3001-0084