$ 94,66
$ 94,66
$ 89,85
-
Grit
Tenax 5" Snail-Lock Automated Edge Full Bullnose Polishing Wheel
The Tenax LT125FB0120 is a 5" (125 mm) snail-lock diamond polishing wheel cut to a full-bullnose profile, made for automated edge machines. The wheel produces the rounded full-bullnose edge profile in a single setup, removing the need for a multi-step manual hand-polish on the edge. Snail-lock mount makes it tool-free to swap on standard automated CNC and linear edge polishers.
Features
- 5" (125 mm) snail-lock diamond polishing wheel
- Full bullnose edge profile in a single setup
- Snail-lock mount — tool-free wheel changes
- Built for automated CNC and linear edge polishers
- Designed for granite, marble, and engineered stone
- Italian Tenax diamond quality
| Property | Detail |
|---|---|
| Brand | Tenax |
| Part Number | LT125FB0120 |
| Diameter | 5 in (125 mm) |
| Mount | Snail-lock |
| Profile | Full bullnose |
| Grit Code | 120 (per part-number suffix) |
| Application | Automated edge polishing |
| Unit Weight | 3.3 lb (1.5 kg) |
- Mount the wheel on a snail-lock spindle.
- Verify water feed reaches the diamond face.
- Run the machine at the wheel's recommended RPM and feed for the stone type.
- Make a light contact pass first to check profile alignment.
- Run the production pass; check edge quality after each wheel change in the stack.
- Wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator.
- Use cut-resistant gloves where applicable.
- Verify the tool is rated for the stone material before starting.
- Inspect the tool before each shift; remove from service if cracks or excessive wear are visible.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator when running stone abrasives. Verify wet water feed before each cut where applicable.
Özellikler
| Grit | #220, #320, #320 W, #400 W, #800 W, #1200 W, #2000 W, #3000 W |